WE HOLD A STRONG PRESENCE IN THE FOLLOWING VERTICALS

Reason / Cause of Leakage Product Suggested
Leakage from the washer or screw area Leakage arrester type C 102
Leakage from the overlap joint of two metal sheets Safe Tape ST 84
Leakage from the overlap joint one of metal & one polycarbonate sheets Safe Tape ST 84
Leakage from the overlap joint one of metal & one polycarbonate sheets - If it is under construction stage DS 6060  R - a double sided tape
Leakage from a crack in the metal sheet Safe Tape ST 84
Leakage from a down pipe, that goes through the roof Safe Tape ST 84
Leakage from a joints of the exhaust ventilator Safe Tape ST 84
Prevention of the leakage from the screw / washer area Safe Protector 66
Leakage from a temporary tarpaulin roof HDPE 6040

LEAKAGE ARRESTOR C 102

Special screw head protector so that you never have to worry about leakage. Very innovatively designed and easy to use product.

WHY USE THE SAFE PROTECTOR ?

  • It is an easy to use, specially designed to enhance the corrosion free life of the screw head
  • It is tested for all weather resistance –cold & hot (extreme winters & summers, rainy season is considered by default)
  • The carefully designed top surface is resistant to bird pecking & other external damages
  • The level of user friendliness is so low that even your unskilled labour can apply it on the roof. The process is simple; clean the surface area, remove the release paper to expose the adhesive, place it on the screw head and apply even & sufficient pressure

APPLICATION PROCESS

  • Thoroughly clean the area around the self-drilling screw
  • Make sure the surface is free of dust, dirt, oil, grease and any other contaminant
  • If the surface is not clean use, wet cloth to remove the visible dirt. If the dirt still persists you may use any solvent like IPA – Isopropyl Alcohol
  • Remove the release paper from the LEAKAGE ARRESTOR to expose the adhesive
  • View the adhesive surface, you will see a cavity in the centre, align this with the screw head and place the LEAKAGE ARRESTOR on the screw head
  • Now use even & sufficient pressure to paste the top sheet on the surface
  • Ensure to achieve a wrinkle free application

BENEFITS

  • The steel cap will ensure longevity of protection and also corrosion free life
  • The top sheet material is non-water absorbent
  • The aluminium lamination is reinforced with a heavy duty non-tearing mesh for protection against the bird pecking and external damage
  • The special purpose adhesive will ensures weather resistance
  • The LEAKAGE ARRESTOR is almost not removable – requires high mechanical pressure to remove

SAFE TAPE ST84

A simple pressure sensitive tape with the scientific construction to deliver results never achieved before. This is a multicomponent product to serve as a waterproof tape; it completely replaces the conventional products being used with a difference. It shall take care of the area for a reasonably longer period of time, in our opinion at least 5 rainy seasons. This can be used over crack of polycarbonate sheet as well as colour coated sheets. It can also be used for sealing off joints of down pipe, overlap etc.

Size: 70 mm X 10 meters
(available in your desired size also)

SAFE TAPE DS 6060 R

A double side pressure sensitive tape for the crucial application between the overlap area. This tape seals of the overlap seam, making it dust proof, moisture proof and water tight.

Size: 24mm X 10 meters
(also available in desired sizes)
Available in 1mm & 2mm thickness

SAFE TAPE HDPE 604O

Avery strong woven HDPE tape. It is anti-U.V. and all weather resistant adhesive tape. It finds various applications like tarpaulin repair, FIBC, joining of tarpaulin material.

Size: 48mm X 50 meters

SAFE PROTECTOR SP66

Special screw head protector so that you never have to worry about leakage. Very innovatively designed and easy to use product.


Size 67mm X 67 mm

WHY USE THE SAFE PROTECTOR ?

  • It is an easy to use, specially designed to enhance the corrosion free life of the screw head
  • It is tested for all weather resistance –cold & hot (extreme winters & summers, rainy season is considered by default)
  • The carefully designed top surface is resistant to bird pecking & other external damages
  • The level of user friendliness is so low that even your unskilled labour can apply it on the roof. The process is simple; clean the surface area, remove the release paper to expose the adhesive, place it on the screw head and apply even & sufficient pressure

APPLICATION PROCESS

  • Thoroughly clean the area around the self-drilling screw
  • Make sure the surface is free of dust, dirt, oil, grease and any other contaminant
  • If the surface is not clean use, wet cloth to remove the visible dirt. If the dirt still persists you may use any solvent like ipa – isopropyl alcohol
  • Remove the release paper from the safe protector to expose the adhesive
  • View the adhesive surface, you will notice a grey colour piece at the centre, align this (special protector) with the screw head and place the SAFE PROTECTOR piece on the screw head
  • Now use even & sufficient pressure to paste the safe protector piece on the surface
  • Ensure to achieve a wrinkle free application

ADVANTAGES OF USING SAFE PROTECTOR

  • The SAFE PROTECTOR in itself is water proof and non-water permeable
  • Protect your existing screw heads from corrosion
  • Protect your roof from leakages (preventive measure)
  • Enhance the life of the screw, since it shall be protected from dust, moisture, weather, & sun light
  • High tear & breaking strength ensures the longevity of the protector
  • You do not require electrical point, skilled labour. You can cover a large surface area of the roof within the shortest time
  • Simple and easy to use
  • Delicately & scientifically designed